We’ve got all the components -- arduino, code to put everything into action, servo motor to trigger the aerosol, LEDs and alarm, infrared sensor and remote, batteries to charge it all up, wood and transparent plastic to house it all, and a guitar kapo to attach the device to the treasured item -- now it’s just a matter of putting it all together!
We discussed a variety of different ways to encase the hardware, and decided to go with a simple cubic/beveled cubic shape, half natural wood and half clear plastic. When testing the power of the infrared remote, we found that in order to arm the device, some part of the case would have to be transparent. The idea of an entirely see-through case wasn’t all that appealing to either of us, and we wanted it to maintain an air of mystery, so we decided to house the aerosol can and servo in a wood compartment. See sketches and progress photos below...
As computing becomes more ubiquitous in our objects, designers need to be more aware of how to design meaningful interactions into electronically enhanced objects. At the University of Washington, a class of junior Interaction Design majors is exploring this question. These pages chronicle their efforts.
Monday, June 10, 2013
Dan | Stephen //Blinking Light
Dan and I worked on getting the light blinking and we had success! The Arduino processes the text information and causes the light circuit to to update accordingly. This interaction loop reacts to itself and live updates. We can use this as a model in the future so that when an amount of toilet paper is pulled make a noise, but if a different amount is pulled make a different noise. Similar to blinking light, text is telling it to be on at one time and then after it is on to be off.
This is how it worked:
This is how it worked:
This is how it looked:
Dan | Stephen // Topic
Dan and I plan to do our project focusing on reducing excessive toilet use. Toilet paper is highly over used especially in the United States and increases forest degradation. Soft toilet paper is especially harmful because it can only be produced by harvesting live trees (no recycling) and releases a lot of toxins when producing. We also find that many sanitary products are not discussed because of social embarrassment (like how much T.P. one uses in the restroom) or because it is viewed as an absolute necessity. We believe that sanitation can be maintained if we can bring awareness to the problem and start conversation about an otherwise uncomfortable topic.
There are two ways we are looking into encouraging the reduction of the amount used:
1. One is to measure the amount of waste produced and then produce the amount of toilet paper needed.
2. The second is to encourage a more appropriate amount of toilet paper by bringing awareness to the problem and developing a fun interaction.
Supplies:
1.
Methane detector, to estimate the amount of waste produced
Fat Content detector, the consistency of fecal matter can be determined by fat content levels
Water proof weight scale, to determine the amount or type of waste produced
Water displacement scale, determine the amount or type of waste produced
Motor/actuator, to dispense the correct amount of toilet paper needed.
2.
Distance measuring tool (mouse optical), measure the amount of T.P. pulled
Music shield, to play sound when toilet paper amount is reached
speaker, to produce a sound when correct or incorrect amount of toilet paper is pulled.
We will experiment/ research into both ideas more before we continue
There are two ways we are looking into encouraging the reduction of the amount used:
1. One is to measure the amount of waste produced and then produce the amount of toilet paper needed.
2. The second is to encourage a more appropriate amount of toilet paper by bringing awareness to the problem and developing a fun interaction.
Supplies:
1.
Methane detector, to estimate the amount of waste produced
Fat Content detector, the consistency of fecal matter can be determined by fat content levels
Water proof weight scale, to determine the amount or type of waste produced
Water displacement scale, determine the amount or type of waste produced
Motor/actuator, to dispense the correct amount of toilet paper needed.
2.
Distance measuring tool (mouse optical), measure the amount of T.P. pulled
Music shield, to play sound when toilet paper amount is reached
speaker, to produce a sound when correct or incorrect amount of toilet paper is pulled.
We will experiment/ research into both ideas more before we continue
As we dove deeper into our project, we realized our form factor that used doorbell wire wasn't flexible enough. Everything was set up and functional except for one broken mic and amp, but we couldn't get over the fact that it didn't lay around the neck the way we wanted. As a result, we ended up taking a risk and ordered new sets of jumper wires with one-day shipping and bought some leather to help conceal the jumbled mess.
The material arrived on time and we started unsoldering our initial concept in hopes that this would turn out for the better.
Laser cutting the leather allowed our "NOYSE" prototype to be much cleaner and accurate.
Sunday, June 9, 2013
Building the actual boxes and coding part two Nick and Mason
20 plus hours of cutting testing and more cutting we have the boxes coming together. one of the main problems that we were running into the boards that we got were slightly warped so the laser cuter was not able to make the cleanest cuts. The boards are still pretty good are are locking together nicely.
Starting to piece together the code on the Arduino side. the basic skeleton of the code essentially looks for a incoming serial information (which would come from processing) and set it as a variable. Depending on the variable Arduino would run through the various code for the specific box for the correlating weather.
Epic Creeper Cam Birdhouse
We wanted to make sure that the camera was safe if we were going to be leaving it out to face the elements. But we also wanted to make sure that it was going to be stealthy enough to not freak out the hummies. So we decieded that making a birdhouse would be the best way to go about it. Once we decided that, we had to figure out how we were going to best fit all the stuff inside, and hopefully make it look nice enough to not be TOO weird...
First we made a really rough cardboard version to make sure the measurements were right:
Using these measurements, me made some adjustments to make a template for a nicer foam-core
After that - Amy's hubby Nick helped us out with some of the heavy machinery to build the house out of wood, and make a super nice finished product!
First we made a really rough cardboard version to make sure the measurements were right:
Using these measurements, me made some adjustments to make a template for a nicer foam-core
After that - Amy's hubby Nick helped us out with some of the heavy machinery to build the house out of wood, and make a super nice finished product!
Building the actual boxes and reading text documents. Nick and Mason
First and formost just have to say that the laser cuter is amazing. With the help of Autocad and illustrator we were able to create jigsawed edged plates that were able to snap together without the need of glue. Bellow is one of the early test using some scrap some quarter inch scrap. For the final box we will most likely be using some hibachi plywood.
~~~~
On the code side we have successfully got processing scanning a text document and sending the Arduino variables depending on the strings that it sees
The key component of the code that is worth showing is the load strings command. Essentially what this is doing is pulling the information form each line of the text document and storing them as as strings. These strings can then be compared to see what the apricot instructions would be to send to the Ardwino.
today = loadStrings("Weather.txt");
numb = loadStrings("2.txt");
possible = loadStrings("possible.txt");
Subscribe to:
Posts (Atom)









.jpg)
