No Phones At The Table – Removing Table – Rishi Agarwal and Annie Pyle

In order for the NeoPixel and acrylic cover to sit flush on the surface of the table, we had to remove material from the table. We made a template using a laser cutter and then cut within the template with a router.

We had a slight mishap along the way. The instrument on the router that prevents the drill bit from plunging too far wasn't tightened properly and we started removing material from the workbench. The deepest hole in the center goes down about an inch and resulted in the drill bit coming in contact with the metal sleeve at 10,000 RPM which shattered it with a bang.